 
|
 |
2000
Insulation Equipment Intec Force/2 Insulation Blowing Machine
With its 1.5 hp agitator motor this machine is a solid workhorse! Ask anyone of the thousands of contractors who have owned a FORCE2 for the past 20 years and they will tell you: no other machine comes close to the production, reliability, and durability of an Intec's FORCE2.
And the FORCE2 is a strong performer for attics, wet-spray and sidewalls alike!
HIGHER PRODUCTION
The FORCE2 is the insulation blower you want when you need a larger, stronger machine. With an 8½ cu. ft. hopper that can hold 50 lbs of material, a strong 1½ hp motor and a powerful 3.6 PSI blower, the FORCE2 blows up to 2,012 lbs of light density cellulose and 428 lbs of fiberglass per hour. And for the more demanding jobs, the FORCE2 is now available with an incredible 4.5 PSI, 116 CFM blower!
RELIABLE WORKHORSE
Since 1980, thousands of professional contractors have selected the FORCE2 as their insulation blower. Some of them still own and operate their very first machine! With its Direct Drive transmission there are no chains or sprockets that wear out or need to be adjusted, so you can use your time to insulate, not repair.
SIMPLE TO OPERATE
The FORCE2 is designed to be operated in the back of any van or truck for easy setup, operation and cleanup. It takes only four switches to operate the FORCE2. No complicated gauges, dials, or knobs; just turn it on! When you want higher production, complete reliability and ease of use, you want a FORCE2.
THE FORCE2 COMES COMPLETE WITH:
100 feet of 3 inch blowing hose
One 3 inch stainless steel hose connector
Three 3 inch stainless steel hose clamps
Two 100 foot power cords
100 foot dual remote control
Variable speed blower pressure control
Airlock stainless steel inserts
Pinset material slide gate
FEATURES:
Polyethylene Construction
100 Detachable remote control cord - New!
Two 100 12/3 twistlock power cords
Direct Drive transmission
1½ hp Agitator motor
6 Vane airlock chamber
Urethane airlock seals
Stainless steel airlock plates
Blower pressure control
SPECIFICATIONS:
Height 45"
Width 32"
Weight 283 lbs.
Hopper Capacity 8½ cu. ft. 50 lbs.
Hose Size 3"
Blower 2stage, 11.5 amps
Drive Motor 1½ hp - 14.7 amps
Transmission Custom, direct drive
Airlock 12" steel
Electric 115V/220V 50/60Hz
Power Requirements Two 20 amp, 115V circuits
Agitator 6vane, CRS, with bale breaker
Warranty 1 year limited
PRODUCTION RATES:
3.6PSI
Fiberglass 428 Lbs./hour
Cellulose 2,012 Lbs./hour
Non-UPS-able item*
Shipping Preferences: For shipping preferences other than default Ground Service for parcels; please note your preference in the Comments: field when you Check Out, i.e. Next Day, Three Day, etc. A Customer Care represenative will contact you promptly to discuss your specific needs.
|
